Model Libraries

20-sim comes with a large collection of components and submodels which are stored in libraries. The libraries are standard available in every version of 20-sim. With these library components, you can create hydraulic systems, mechanical structures, electric drives, control systems and much more. You can inspect the libraries by clicking th Library tab at the left of the Editor.

Iconic Diagrams

The Iconic Diagrams library contains physical building blocks for electrical systems, mechanics, hydraulics and thermal systems.

Electric

  • Various voltage and current sources
  • Inductors, resistors, capacitors, etc.
  • Diodes, op-amps and rectifiers

Hydraulic

  • Orifices and laminar resistances
  • Cylinders, accumulators, tanks
  • Pumps and motors
  • Valves
  • Flow, power and pressure sensors

Thermal

  • Heat capacity and heat flow
  • Convection and radiation elements
  • Sensors
  • Heat generators

Mechanical

  • Inertia's, springs, dampers, etc.
  • Bearings, backlash and clutch models
  • Advanced friction models (LuGre, Dahl, KFM)
  • Belts, spindles, gears and differentials
  • Various types of sensors and encoders

All elements in the mechanical library are defined for the rotational as well as the translational domain. Furthermore, there is a special library for 2D and 3D bodies with small rotations.

Signal

The signal library contains a large collection of building bocks for block diagrams.

  • Gain, integrate, differentiate, delay, etc.
  • Several filter models (Butterworth, Bessel)
  • Discrete elements (AD, DA, sample, hold)
  • Wave and signal generators
  • Logical operators
  • Various controllers

Bond Graph

20-sim contains a bond graph library with all the standard bond graph elements.

  • Sources: Se, Sf, MSe, MSf
  • Storage elements: I, C
  • Resistor: R
  • Transformers: TF, GY, MTF, MGY
  • Junctions 1, 0, ...

You can create custom bond graph elements and add them to the library.

Customizing

All 20-sim models are stored in files. A folder with a collection of model files is called a model library. In the Editor setting you can define which model libraries should be displayed in the Editor. All models are open. You can inspect their contents and change them to create new models. By collecting models in a new folder, you can create custom libraries.

Read More

You can find more detailed information on the 20-sim libraries and the blocks that are contained in the 20-sim webhelp.

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you agree with our cookie policy.
More information Ok