What is theTS-7300 Demonstration Kit ?

Description

The TS-7300 Demonstration Kit is an TS-7300 board with extras to quickly discover the power of modeling & rapid prototyping with 20-sim & 20-sim 4C. It is plug & play, just connect the board to and you are ready to go.

Includes

• 20-sim 4C ready SD Card : The demonstration kit is equipped with an pre-installed OS so no configuration is needed.
• Sensor : A sample sensor, a potentiometer, is supplied to demonstrate the analog to digital input of the TS-7300 board.
• Actuator : A sample actuator, a LED, is supplied to demontarte the PWM output of the TS-7300 board.
• Models : Various models are supplied to test the sensor and actuator aswell as models that combine the sensor and actuater, control the brightness with the potentionmeter.
• Manual : A manual describing the installation, experiments and more is supplied.
• Power-supply and cross-cable are included.

Manual (supplied on CD-rom, with sample models)

The Demonstration Kit manual contains the following.

• Installing & Testing : How to install the software and test if the Demonsration Kit is working properly.
• Measurement : The Demonstration Kit is equipped with a sample sensor to measure. Various examples show how to use this sensor for measurements.
• Acutation: Using experiments you learn how to use LED actuation.
• Control : You will learn about controlling the actuator with the sensor.

Requirements

• A Windows PC with an ethernet connection.
• 20-sim 4.0 Professional or higher.
• 20-sim 4C 1.1 or higher.